Today we have reached the 19 UCS cars, although this is still 1 below the minimum, we decided to let the project go ahead.

A total of 25 units will be built, of which 6 are still available for free sale.

For your information, what materials we are going to use: the cars.
Lenz 49025 for the shafts, this shaft complies with the NEM331 standard and has a flange height of only 1.15 mm.
Lenz 49010 for the couplings.
Lenz 49013 for the nemschacht.

If you want working screw couplings on the carriage and NOT the Lenz couplings, please indicate this in a response to this e-mail, Lenz 49015 is used for the screw couplings.

Furthermore, mainly the car will consist of resin 3D printing, where necessary in the frame brass profiles and the piping will consist of brass.

If you are still interested in the car, I would like to receive your address details for the invoice in an answer to this e-mail. This invoice concerns the 10% down payment. Preferably before the end of January

During the Ontraxs weekend in March I will have an almost finished UCS car with me.

Modelspoor Design
Wesley Munnik